33%玻纤增强 美国奥升德PA66 R533H01 BK 热稳定 耐水解 电动工具 齿轮 外壳应用
Vydyne® R533H01
Polyamide 66
Ascend Performance Materials Operations LLC
33% 玻璃纤维增强材料
产品说明：
Vydyne R533H01 is 33% glass-fiber reinforced, hydrolysis-resistant, heat-stabilized PA66 resin. Available in black, it is specifically designed to maximize the retention of physical properties when exposed to anti-freeze solutions at elevated temperatures. This product is lubricated for improved machine feed and flow.
Glass-reinforced Vydyne resins provide higher heat distortion temperature, resistance to creep and better dimensional stability when compared with unreinforced PA66. These products have good chemical resistance to a broad range of chemicals including gasoline, hydraulic fluids and most solvents.
Vydyne R533H01 resin is heat-stabilized to minimize oxidative degradation of the polymer when exposed to elevated temperatures in service. This product provides improved retention of physical properties under exposure to long-term heat. Also, Vydyne R533H01 resin has excellent knit-line strength and fatigue resistance, which is essential for cycle testing with anti-freeze solutions.
Typical Applications/End Uses:
Vydyne R533H01 resin has been used for many under-the-hood automotive applications, motor housings for power tools and garden appliances. This resin has also been used in miscellaneous brackets, gears and clips that require high rigidity and strength.
物性信息：
| 填料/增强材料 | 玻璃纤维增强材料, 33% 填料按重量 |
| 添加剂 | 热稳定剂 润滑剂 |
| 特性 | 刚性，高 高强度 良好的流动性 耐水解性 热稳定性 润滑 脱模性能良好 |
| 用途 | 齿轮 动力/其它工具 汽车的发动机罩下的零件 外壳 |
| 机构评级 | ASTM D 4066 PA0121G35 ASTM D 6779 PA0121G35 |
| UL文件号 | E70062 |
| 外观 | 黑色 |
| 形式 | 粒子 |
| 加工方法 | 注射成型 |
| 密度 | 1.40 | -- | g/cm³ | ISO 1183 |
| 收缩率 | ISO 294-4 | |||
| 垂直流动方向 : 23°C, 2.00 mm | 0.90 | -- | % | ISO 294-4 |
| 流动方向 : 23°C, 2.00 mm | 0.40 | -- | % | ISO 294-4 |
| 吸水率 | ISO 62 | |||
| 23°C, 24 hr | 0.80 | -- | % | ISO 62 |
| 平衡, 23°C, 50% RH | 1.7 | -- | % | ISO 62 |
| 拉伸模量 (23°C) | 10600 | 7900 | MPa | ISO 527-2 |
| 拉伸应力 (断裂, 23°C) | 205 | 145 | MPa | ISO 527-2 |
| 拉伸应变 (断裂, 23°C) | 3.0 | 5.0 | % | ISO 527-2 |
| 弯曲模量 (23°C) | 10200 | 6500 | MPa | ISO 178 |
| 弯曲应力 (23°C) | 290 | 200 | MPa | ISO 178 |
| 泊松比 | 0.40 | -- | ISO 527-2 |
| 简支梁缺口冲击强度 | ISO 179/1eA | |||
| -30°C | 10 | 12 | kJ/m² | ISO 179/1eA |
| 23°C | 11 | 14 | kJ/m² | ISO 179/1eA |
| 简支梁无缺口冲击强度 | ISO 179/1eU | |||
| -30°C | 70 | 85 | kJ/m² | ISO 179/1eU |
| 23°C | 80 | 90 | kJ/m² | ISO 179/1eU |
| 悬壁梁缺口冲击强度 | ISO 180 | |||
| -30°C | 10 | 12 | kJ/m² | ISO 180 |
| 23°C | 12 | 14 | kJ/m² | ISO 180 |
33%玻纤增强 美国奥升德PA66 R533H01 BK 热稳定 耐水解 电动工具 齿轮 外壳应用
33%玻纤增强 美国奥升德PA66 R533H01 BK 热稳定 耐水解 电动工具 齿轮 外壳应用
33%玻纤增强 美国奥升德PA66 R533H01 BK 热稳定 耐水解 电动工具 齿轮 外壳应用